1. Turn on the AV amplifier you wish to operate, press the TV button on the Sky+ RCU (Remote Control Unit).
2. Press and hold down the Select then the 0 (zero) buttons on the Sky+ RCU until the LED (Light Emitting Diode) blinks twice.
3. Input the 4 digit number from the Sky+ RCU direct set code list pages. The LED should flash twice to confirm that the code was entered successfully.
4. Use the Left navigation button on the Sky+ RCU to try and switch the AV Amplifier into standby. If the standby button works then the other AV Amplifier functions should also work and the correct code has been selected. If all functions do not work correctly then repeat steps 1 - 3 and work through all the 4 digit numbers from the Sky+ RCU direct set code list pages until you find the code which supports all or as many of the AV Amplifier functions as possible.

Important
The most popular codes are sorted first within the Sky+ RCU direct set code list, therefore the codes should be attempted in sequence one after the other.
[note: The remote control will operate all functions on the digibox (whilst in Sky mode) however it does not support the functions on their AV Amplifier at the current time. You must therefore keep your AV Amplifier RCU to hand to control the amplifier functions.
This is not a fault with the remote or the customerís amplifier. We may have codes in the future which will enable the Sky+ remote to work with your amplifier functions.]


Codes:
Manufacturer Model Codes

Aiwa 0149 or 0186 or 1433
Akai 0143 or 0468
Alba 0587
Amstrad 0830 or 0772

Arcam 0669 or 0297
Audiolab 0297 or 1217
Bat 0297
Bush 0297 or 0449 or 0875
Clatronic 0772
Denon 0032 or 0188
Elta 0772
Garrard 0468 or 0772
Genexxa 0468
Goldmund 0297
Goodmans 0468 or 0772 or 0449 or 1081

Grundig 0297 or 0875 or 1217 or 1117 or 0772
Harman/Kardon 0138
Harwood 0772
Inkel 0055 or 0530
Intersound 0772
JBL 0138
JVC 0102 or 0492
Kenwood 1055 or 1341 or 1597 or 0341 or 0342 or 0055
Koss 0772
Linn 0297
LXI 0772
Marantz 0297 or 1117 or 1217
Mark 0297
Matsui 0772
Mafui 0342
Meridian 0297
Micromega 0297 or 1217
Minton 1123

Mitsubishi 0468
Mx Onda 0772
Myryad 0297 or 1217
Naim 0297
Nikkei 0772
NTDE 0772
Okano 0468
Orient Power 0772
Pace 0828
Panasonic 0336 or 1336 or 1337 or 1546
Philips 1117 or 1217 or 0669 or 0297
Phontrend 0530
Pioneer 0297 or 0317
Pye 0875
Quad 0297
RadioShack 0772
Revox 0297
Roadstar 0875
Sansui 1117
Sanyo 0772
Schneider 1081 or 0138 or 0772
Sherwood 0530
Sony 1086 or 1186 or 1286 or 1786
Taekwang 0468
Teac 0449
Technics 1336 or 1337 or 1546
Telefunken 0875
Thorens 0297 or 1217

Thorn 0772
Universum 0297 or 0772 or 0468
Victor 0102
Videologic 1123
Wharfedale 0468
Yamaha 0204 or 1304
Zenith 0772

AV Amp Volume/Mute Control Punch Thru
If your Sky+ remote is fairly new or you have the Sky Navigator remote it may be possible to set the normal volume/mute controls to work your amp rather than the TV. And without pressing the TV key!

Proceed as follows
1. Program the remote as detailed above to control your amp using the arrow keys in TV mode.
2. Press TV Key
3. Hold down select and press 1 until the remote's LED flashes twice (if it only flashes once or remains on steady I'm afraid your remote does not support this feature).
4. Press Sky key and enjoy.

To reverse the process press select and 2 rather than 1.